AirLink Wireless N 150 PCI Manuale Utente

Wireless N 150 PCI Adapter Model # AWLH5075 User’s Manual Rev. 1.0

9 3. Connect to Wireless Network This section describes how to connect your wireless adapter to a wireless network. Note: If the Airlink101 Wirele

10 Step 3 After the adapter connects to the wireless network successfully, a blue triangle will appear at the front of your wireless network.

11 4. Configure Wireless Monitor This section describes the various functions of the Wireless Monitor that you can configure. Some general function

12 Extra Info: Displays the link status (‘Link is up’ or Link is down’, and the radio transmitting power of your network card. Channel: Displays t

13 4.1 Profile The Profile tab lists the current profiles and allows you to manage and create new profiles. The Profile List box lists all the

14 4.2 Network The Network tab lists all of the available networks that the network card detects in your area. Rescan: Clicking Rescan will refre

15 Profile Name: Please give this profile a name, up to 32 alphanumerical Characters and symbols are allowed, but space is not allowed. SSID: The S

16 Step 4 Select the profile you just created and click Activate.

17 4.3 Advanced This wireless network card provides several advanced settings for experienced wireless users. You can change these settings to incr

18 4.4 Statistics The Statistics section gives you information about transmit and receive packet count. Click Reset Counter to reset all counters

1 Table of Contents 1. Introduction ...

19 WMM Enable: Check this box to enable WMM function. Please click ‘Apply’ button on the right of this check box after you check or uncheck this b

20 4.6 WPS (Easy Setup Button) WPS is a new and easy way to configure the encryption for your wireless network clients. In order to use it, you nee

21 Step 2a If you selected PIN Input method, go to a computer that is connected to your Wireless Router. Open the browser; enter http://192.168.2.1

22 Step 2d Enter the PIN number you just wrote down into the Client PIN Number box and click Start PIN. Continue to Step 4. Step 3a If you sele

23 Note: If you cannot connect successfully with WPS, you need to log in to your router’s configuration page and click on Wireless. Then click WPS

24 4.7 CCX Enable Cisco Compatible eXtensions. CCX is a wireless feature developed by Cisco used to improve the wireless performance with CCX compa

25 4.8 About The About window provides the information about the Wireless Monitor Utility version and the current driver version.

26 Troubleshooting 1. If you cannot open the wireless monitor utility, make sure that the PCI adapter is inserted firmly into the PCI slot. 2. If y

27 Appendix A - Specification Frequency Band • 2.4Ghz Standards • IEEE 802.11b / g / n Interface • 32-bit PCI Data Rate* • Dow

28 Appendix B - Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Cla

2 1. Introduction Congratulations on your purchase of the Wireless N 150 PCI Adapter. Its high bandwidth combined with extended wireless coverage d

29 Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Web Site: www.airlink101.com *Theo

3 2. Install the Wireless PCI Adapter Step 1.1 SWITCH THE COMPUTER OFF, remove the cover and insert the wireless PCI adapter into an available PCI

4 Step 1.5 Insert the Installation CD in the CD drive. When the autorun screen pops up, click Install Utility and Driver. Windows 7 and Vista U

5 Step 1.6 Click Next. Step 1.7 Click Next to start installing the software.

6 For Windows 7 and Vista users: Click Install this driver software anyway. For Windows XP users: click Continue Anyway at the Windows Logo.

7 Step 1.8 Click Finish.

8 Step 1.9 You will see the Airlink101 Wireless Monitor pops up. Congratulations! The Wireless N 150 PCI Adapter has now been successfully insta